Modifying a layer 2 interface – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 134
113
Item Description
IPv6 Config
Set the option for the interface to obtain an IPv6 link-local address, include.
•
None—Select this option if you do not want to assign an IPv6 link-local address
to the interface.
•
Auto—Select this option for the system to automatically assign an IPv6 link-local
address to the interface.
•
Manual—Select this option to manually assign an IPv6 link-local address to the
interface. If this option is selected, you must set the IPv6 Link Local Address field.
IPv6 Link Local Address
If the Manual option is selected for the interface to obtain an IPv6 link-local address,
you must set an IPv6 link-local address for the interface.
Modifying a Layer 2 interface
1.
Select Device > Interface from the navigation tree.
The page in
appears.
2.
Click the
icon corresponding to a Layer 2 interface.
The page for modifying a Layer 2 interface appears.
Figure 73 Modifying a Layer 2 physical interface
3.
Modify the information about the Layer 2 physical interface as described in
4.
Click Apply.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module