H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 310)

289
c. Click Apply.
Figure 270 Enabling ALG for SIP
2. Configure ACL 2001:
a. Select QoS > ACL IPv4 from the navigation tree.
b. Click the Add tab.
c. Enter 2001 for ACL Number, as shown in Figure 271 .
d. Click Apply.
Figure 271 Adding basic ACL
e. Click the Basic Setup tab.
f. Select 2001 for ACL, and Permit for Action. Select the Source IP Address box and enter
192.168.1.0. Enter 0.0.0.255 for Source Wildcard, as shown in
Figure 265 .
g. Click Add.