H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 668)

647
Item Description
Periodic Time Range
• Start Time—Set the start time of the periodic time range.
• End Time—Set the end time of the periodic time range. The end time must be later
than the start time.
• Sun, Mon, Tue, Wed, Thu, Fri, and Sat—Select the day or days of the week on
which the periodic time range is valid. You can select any combination of the days
of the week.
NOTE:
These items are available after you select the Periodic Time Range option.
Absolute Time Range
• From—Set the start time of the absolute time range. The time of the day is in the
hh:mm format (24-hour clock), and the date is in the MM/DD/YYYY format.
• To—Set the end time of the absolute time range. The time of the day is in the hh:mm
format (24-hour clock), and the date is in the MM/DD/YYYY format. The end time
must be later than the start time.
NOTE:
These items are available after you select the Absolute Time Range option.
Adding an ACL
1. Select QoS > ACL IPv4 from the navigation tree.
2. Click the Add tab to enter the ACL adding page, as shown in Figure 405 .
Figure 684 Adding an ACL
3. Configure the ACL information, as described in Table 209 .
4. Click Apply.