H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 574)

553
Item Description
Default AuthN
Name
Secondary
Method
Configure the default authentication method and secondary authentication method for all
types of users.
Options include:
• HWTACACS—HWTACACS authentication. You must specify the HWTACACS scheme to
be used.
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the default authentication setting, which is local
authentication.
IMPORTANT:
Use the default authentication method if the AC performs authentication on the connecting
APs.
LAN-access
AuthN
Name
Secondary
Method
Configure the authentication method and secondary authentication method for LAN users.
Options include:
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for LAN users.
Login AuthN
Name
Secondary
Method
Configure the authentication method and secondary authentication method for login users.
Options include:
• HWTACACS—HWTACACS authentication. You must specify the HWTACACS scheme to
be used.
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for login users.
PPP AuthN
Name
Secondary
Method
Configure the authentication method and secondary authentication method for PPP users.
Options include:
• HWTACACS—HWTACACS authentication. You must specify the HWTACACS scheme to
be used.
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for PPP users.
Portal AuthN
Name
Secondary
Method
Configure the authentication method and secondary authentication method for portal users.
Options include:
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for portal users.