H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 659
638
Figure 680 Session configuration
2.
Configure basic settings as described in
.
Table 205 Configuration items
Item Description
Enable unidirectional traffic detection
Enable or disable unidirectional traffic detection.
•
When unidirectional traffic detection is enabled, the session
management feature processes both the unidirectional and
bidirectional traffic.
•
When unidirectional traffic detection is disabled, the session
management feature processes only the bidirectional traffic.
ACL
Configure the persistent session rule according to the ID of an
ACL.
Only one ACL can be referenced as the persistent session rule,
and the last referenced ACL takes effect. If no ACL is specified,
persistent sessions are not allowed.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module