H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 126)

105
To restore the configuration:
1. Select Device > Configuration from the navigation tree.
2. Click the Restore tab.
The page for restoring configuration appears.
Figure 66 Restoring the configuration
3. Click the Browse button before (the file with the extension ".cfg.")
The file upload dialog box appears. You can select the .cfg file to be uploaded.
4. Click the Browse button before (the file with the extension ".xml.")
The file upload dialog box appears. You can select the .xml file to be uploaded.
5. Click Apply.
Saving the configuration
IMPORTANT:
•
H3C recommends that you do not perform any operation on the Web interface while the configuration
is being saved.
• The system does not support saving the configuration of two or more consecutive users. The system
prompts the users to try again if one user's configuration is being saved.
The save configuration module provides the function to save the current configuration to the configuration
file (.cfg file) to be used at the next startup. You can save the configuration by using one of the following
ways: fast or common.
Fast
Click the Save button at the upper right of the auxiliary area, and you can save the configuration to the
configuration file.