Applying a qos policy to a wlan service – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 697

676
Figure 702 Applying a policy to a port
3.
Select a policy and apply the policy to the specified ports, as described in
.
4.
Click Apply.
Table 224 Configuration items
Item
Description
Please select a policy
Select an existing policy in the list.
Direction
Set the direction in which you want to apply the policy:
•
Inbound—Applies the policy to the incoming packets of the specified ports.
•
Outbound—Applies the policy to the outgoing packets of the specified ports.
Please select port(s)
Click the ports to which the QoS policy is to be applied in the port list. You can select
one or more ports.
Applying a QoS policy to a WLAN service
1.
Select QoS > Service Policy from the navigation tree.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module