Configuring the wireless service, Configuring cac – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 725
704
Enable CAC for AC-VO and AC-VI on the AP. To guarantee high priority clients (AC-VO and AC-VI clients)
sufficient bandwidth, use the user number-based admission policy to limit the number of access users to
10.
Figure 731 Network diagram
Configuring the wireless service
1.
Configure the AP, and establish a connection between the AC and the AP.
For related configurations, see "
." Follow the steps in the related
configuration example to establish a connection between the AC and the AP.
Configuring CAC
1.
Select QoS > Wireless QoS from the navigation tree.
By default, the Wireless QoS tab is displayed.
2.
Make sure WMM is enabled.
Figure 732 Wireless QoS configuration page
3.
As shown in
, select the AP to be configured on the list, and click the icon for the AP
in the Operation column.
4.
On the Client EDCA list, select the priority type (AC_VO, for example) to be modified, and click the
icon for the priority type in the Operation column.
5.
Select Enable from the CAC list.
6.
Click Apply.
Figure 733 Enabling CAC
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module