H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 591)

570
Figure 594 Adding an access device
2. Add a user account for device management:
a. Click the User tab.
b. From the navigation tree, select Access User View > Device Mgmt User.
c. Click Add.
d. Enter hello@bbb as the username.
e. Enter abc as the password, and confirm the password.
f. Select Telnet as the service type.
g. Enter 3 as the EXEC privilege level.
This value identifies the privilege level of the Telnet user after login, which is 0 by default.
h. In the IP Address List of Managed Devices area, click Add to specify 10.1.1.0 to 10.1.1.255
as the range of host IP addresses to be managed. The address range must contain the IP
address of the access device.
i. Click OK.