H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 887
866
Figure 922 Configuring a rule to permit packets from 10.1.1.0/24 to 10.1.2.0/24
3.
Configure an IPsec proposal named tran1:
a.
From the navigation tree, select VPN > IPSec.
b.
Click the Proposal tab.
c.
Click Add.
d.
On the page that appears, select Custom mode.
e.
Enter the IPsec proposal name tran1.
f.
Select the packet encapsulation mode Tunnel.
g.
Select the security protocol ESP.
h.
Select the authentication algorithm SHA1.
i.
Select the encryption algorithm DES.
j.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module