H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 324
303
Figure 287 AP setup
3.
Configure the AP as described in
4.
Click Apply.
Table 108 Configuration items
Item Description
AP Name
Rename the AP.
Country/Region
Code
Select a country/region code.
By default, no country/region code is configured for an AP, and the global
country/region code applies. If both country/region code and global country/region
code are configured, the AP uses its own country/region code. For how to configure
the global country/region code, see "
."
IMPORTANT:
Some ACs and APs have fixed country/region codes, whichever is used is determined as
follows:
•
An AC's fixed country/region code cannot be changed, and all managed APs
whose country/region codes are not fixed must use the AC's fixed country/region
code.
•
An AP's fixed country/region code cannot be changed and the AP can only use the
country/region code.
If an AC and a managed AP use different fixed country/region codes, the AP uses its
own fixed country/region code.
Radio Number
Select the number of the radios on the AP. The value depends on the AP model.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module