Internal server configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 299
278
Figure 254 Configuring NAT address pool 0
3.
Configure dynamic NAT:
a.
Click Add in the Dynamic NAT area.
The Add Dynamic NAT page appears.
b.
Select Vlan-interface2 for Interface and enter 2001 for ACL.
c.
Select PAT for Address Transfer.
d.
Enter 0 for Address Pool Index.
e.
Click Apply.
Figure 255 Configuring dynamic NAT
Internal server configuration example
Network requirements
As illustrated in
, a company provides two Web servers and one FTP server for external users
to access. The internal network address is 10.110.0.0/16. The internal address for the FTP server is
10.110.10.3/16, for the Web server 1 is 10.110.10.1/16, and for the Web server 2 is 10.110.10.2/16. The
company has three public IP addresses from 202.38.1.1/24 through 202.38.1.3/24. Specifically, the
company has the following requirements:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module