Switching to fat ap, Configuring wireless location – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 761
740
Item Description
Software Version
Enter the software version of the AC in the correct format.
Switching to fat AP
1.
Select Advanced > AP Setup from the navigation tree.
2.
Click the Switch to Fat AP tab.
3.
Select the desired AP.
4.
Click Switch to Fat AP to perform AP working mode switchover.
NOTE:
Before you switch the work mode, you must download the fat AP software to the AP.
Configuring wireless location
1.
Select Advanced > Wireless Location from the navigation tree.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module