H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 439
418
5.
Configure local MAC authentication:
a.
In the Security Setup area, select Open-System from the Authentication Type list.
b.
Select the Port Set box, and select mac-authentication from the Port Mode list.
c.
Select the MAC Authentication box, and select branch.net from the Domain list. Make sure the
mandatory authentication domain and the ISP domain in the configuration file are the same.
d.
Click Apply.
Figure 433 Configuring local MAC authentication
6.
Enable wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Select the mac-auth box.
c.
Click Enable.
Figure 434 Enabling wireless service
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module