Configuring the time zone and daylight saving time – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 118
97
Item Description
Key 1
Set NTP authentication key.
The NTP authentication feature should be enabled for a system
running NTP in a network where there is a high security demand. This
feature enhances the network security by means of client-server key
authentication, which prohibits a client from synchronizing with a
device that has failed authentication.
You can set two authentication keys, each of which is composed of a
key ID and key string.
•
ID is the ID of a key.
•
Key string is a character string for MD5 authentication key.
Key 2
External Reference
Source
NTP Server
1/Reference
Key ID
Specify the IP address of an NTP server, and configure the
authentication key ID used for the association with the NTP server. The
device synchronizes its time to the NTP server only if the key provided
by the server is the same with the specified key.
You can configure two NTP servers. The clients will choose the optimal
reference source.
IMPORTANT:
The IP address of an NTP server is a unicast address, and cannot
be a broadcast or a multicast address, or the IP address of the
local clock source.
NTP Server
2/Reference
Key ID
Configuring the time zone and daylight saving time
1.
Select Device > System Time from the navigation tree.
2.
Click Time Zone.
The time zone page appears.
Figure 58 Configuring the time zone
3.
Configure the time zone and daylight saving time as described in
4.
Click Apply.
Table 39 Configuration items
Item Description
Time Zone
Set the time zone for the system.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module