H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 157)

136
Figure 93 Creating an SNMP Community
4. Configure SNMP community settings as described in Table 55 .
5. Click Apply.
Table 55 Configuration items
Item Description
Community Name Set the SNMP community name.
Access Right
Configure the access rights:
• Read only—The NMS can perform read-only operations to the MIB objects
when it uses this community name to access the agent.
• Read and write—The NMS can perform both read and write operations to
the MIB objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that
can be accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to
the agent from the NMS with the specified source IP address.
Configuring an SNMP group
1. Select Device > SNMP from the navigation tree.
2. Click the Group tab.
The group tab page appears.
Figure 94 SNMP group