H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 311)

290
Figure 272 Configuring an ACL rule to permit packets sourced from 192.168.1.0/24
To prohibit other users to access the Internet:
a. Select Deny for Action, as shown in Figure 273 .
b. Click Add.
Figure 273 Configuring an ACL rule to deny packets
3. Configure the NAT address pool:
a. Select Network > NAT from the navigation tree.
The Dynamic NAT page appears.
b. Click Add in the Address Pool area.
The Add NAT Address Pool page appears.
c. Enter 1 for Index.
d. Enter 5.5.5.9 for Start IP Address.
e. Enter 5.5.5.11 for End IP Address.
f. Click Apply.