H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 78)

57
Table 17 Configuration items
Item Description
AP Name Enter the name of the AP.
Model Select the model of the AP.
Serial ID
Specify the serial ID of the AP.
• If the Auto box is not selected, you need to manually enter a serial ID.
• If the Auto box is selected, the AC automatically searches the serial ID of the
AP. Use this option together with the auto AP function to implement
automatic AP discovery so that the AP can connect with the AC
automatically. If there are a large number of APs, the automatic AP
discovery function can avoid repeated configuration of AP serial numbers.
For information about configuring auto AP, see " Configuring APs ."
Country/Region Code
Select a country/region code for the AP.
By default, no country/region code is configured for the AP and the AP uses
the global country/region code (which is configured on the AC). If the
country/region code is specified on this page, the AP uses this configuration.
For information about the country/region code configured on the AC, see
"
Configuring advanced settings ."
Radio Radio unit of the AP. The radio unit varies depending on the AP model.
Mode Select the radio mode. The radio mode varies depending on the AP model.
Channel
Select the working channel.
The channel list for the radio depends on the country/region code and radio
mode, and it varies with device models.
Auto: Specifies the automatic channel mode. With Auto specified, the AC
evaluates the quality of channels in the wireless network, and selects the best
channel as the working channel.
After the channel is changed, the power list is refreshed.
Power
Select the transmission power.
The maximum power of the radio depends on the country/region code,
working channel, AP model, radio mode, and antenna type. If 802.11n is
specified as the radio mode, the maximum power of the radio also depends
on the bandwidth mode.
Configuration summary
1. On the AP Configuration page, click Next.
The configuration summary page appears, displaying all configurations you have made.