H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 251
230
Figure 199 Creating static link aggregation group 1
Method 2: Create a dynamic link aggregation group
1.
From the navigation tree, select Network > Link Aggregation.
2.
Click Create.
3.
Configure dynamic aggregation group 1:
a.
Enter link aggregation interface ID 1.
b.
Select the Dynamic (LACP Enabled) option for aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3.
4.
Click Apply.
Figure 200 Creating dynamic link aggregation group 1
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module