H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 449
428
3.
Configure 802.1X authentication method:
See "
Remote 802.1X authentication configuration example
."
4.
Download the configuration file to the AP:
a.
Select AP > AP Setup from the navigation tree, click the
icon for the target AP.
b.
Click Advanced Setup, and specify the configuration file as ACL.cfg.
c.
Click Apply.
Figure 451 Downloading the configuration file to the AP
5.
Apply the forwarding policy to the access service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click the
icon for the target wireless service.
c.
Select the forwarding mode Forwarding Policy Based, specify the forwarding policy as st,
select the packets format 802.3, and click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module