H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 74)

53
Figure 25 RADIUS Configuration page
4. Configure the parameters as described in Table 14 .
Table 14 Configuration items
Item Description
Service Type
Select the type of the RADIUS server:
• extended—Specifies extended RADIUS server, which is usually an IMC
server. In this case, the RADIUS client (access device) and the RADIUS
server exchange packets based on the specifications and packet format
definitions of a private RADIUS protocol.
• standard—Specifies the standard RADIUS server. In this case, the RADIUS
client (access device) and the RADIUS server exchange packets based on
the specifications and packet format definitions of the standard RADIUS
protocols (RFC 2138, RFC 2139, and the updates).
Authentication IP Enter the IP address of the RADIUS authentication server.
Authentication UDP Port Enter the port number of the RADIUS authentication server.
Authentication Key Enter the shared key of the RADIUS authentication server.
Accounting IP Enter the IP address of the RADIUS accounting server.
Accounting UDP Port Enter the port number of the RADIUS accounting server.
Accounting Key Enter the shared key of the RADIUS accounting server.
Portal configuration
1. On the wireless configuration page, select Portal for the Primary Service Authentication Type field.
2. Click Next.
The RADIUS Configuration page appears.