H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 857
836
Figure 890 Configuring a rule to allow packets from subnet 10.1.1.0/24 to subnet 10.1.2.0/24
3.
Configure an IKE peer named peer:
a.
From the navigation tree, select VPN > IKE.
b.
Click the Peer tab.
c.
Click Add.
d.
Enter the peer name peer.
e.
Select the negotiation mode Main.
f.
Enter the remote gateway IP address 2.2.2.2.
g.
Select Pre-Shared Key, and enter the pre-shared key abcde in the Key and Confirm Key fields.
h.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module