H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 824)

803
Figure 849 Configuring BAS AC 2
2. Specify an IP address for the master AC:
# Specify the IP address of the master AC as 192.168.0.111.
system-view
[BAS AC2] wlan master-ac ip 192.168.0.111
3. Configure AP 1:
Configure AP 1 on BAS AC 2. For more information, see "
Configuring access services ."
4. Configure the master AC:
Wireless devices do not support the master AC function. For more information about the master
AC configuration, see relevant manuals.
VLAN pool configuration example
Network requirements
Configure a VLAN pool that contains VLANs 2 through 5 for the AP to assign clients to different VLANs.
Figure 850 Network diagram
Switch AP AC
Client
Client
Client