Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 238
217
Figure 190 Network diagram
Configuration procedure
1.
Enable DHCP snooping:
a.
Select Network > DHCP from the navigation tree.
b.
Click the DHCP Snooping tab.
c.
Select the Enable option for DHCP Snooping.
Figure 191 Enabling DHCP snooping
2.
Configure DHCP snooping functions on GigabitEthernet 1/0/2:
a.
Click the
icon of GigabitEthernet 1/0/2 on the interface list.
b.
Select the Trust option for Interface State.
c.
Click Apply.
Host
DHCP client
AC
DHCP snooping
AP
DHCP client
GE1/0/1
DHCP server
GE1/0/2
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module