H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 45)

24
Function menu Description User level
Diagnostic
Tools
IPv4 Ping
Ping an IPv4 address or host and display
the result.
Visitor
IPv6 Ping
Ping an IPv6 address or host and display
the result.
Visitor
Trace Route
Perform trace route operations and
display the result.
Visitor
NAT
Dynamic Address Translation
Display information about address pool,
and configure dynamic address
translation.
Monitor
Create, modify, or delete an address
pool, and configure dynamic address
translation.
Configure
Static Address Translation
Display information about static address
mapping, and configure static address
translation.
Monitor
Create, modify, or delete a static address
mapping, and configure static address
translation.
Configure
Internal Server
Display information about internal server
and DNS mapping.
Monitor
Create, modify, or delete an internal
server and DNS mapping.
Configure
Application Layer Protocol Detection
Display configurations of application
layer protocol detection.
Monitor
Configure application layer protocol
detection.
Configure
AP
AP Setup
Display AP-related information, including
AP name, AP IP address, serial ID, model
and status.
Monitor
Add an AP and modify the AP
configuration.
Configure
Auto AP
Display auto AP information after auto AP
is enabled, including AP name, model,
serial ID and IP address.
Monitor
Enable auto AP. Configure
AP Group
Display AP group information. Monitor
Create and configure an AP group. Configure