Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 260
239
Figure 212 Adding a DNS domain name suffix
Verifying the configuration
Use the ping host command on the AC to verify that the communication between the AC and the host is
normal and that the corresponding destination IP address is 3.1.1.1.
1.
Select Diagnostic Tools > Ping from the navigation tree to enter the IPv4 Ping configuration page.
2.
Enter host in the Destination IP address or host name field.
3.
Click Start to execute the ping command
4.
View the result in the Summary field.
Figure 213 Ping operation
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module