Interface management configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 139
118
Interface management configuration example
Network requirements
Create VLAN-interface 100 and specify its IP address as 10.1.1.2.
Configuration procedure
1.
Create VLAN 100:
a.
Select Network > VLAN from the navigation tree.
The VLAN tab page appears.
b.
Click Add.
The page for creating VLANs appears.
Figure 75 Creating VLAN 100
c.
Enter VLAN ID 100.
d.
Click Apply.
2.
Create VLAN-interface 100 and assign an IP address for it:
a.
Select Device > Interface from the navigation tree.
b.
Click Add.
The page for creating an interface appears.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module