H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 475
454
Figure 488 Configuring mesh portal service
7.
Configure the same working channel and enable the radio on the MAP and MPP:
a.
Select Radio > Radio from the navigation tree.
b.
Click the
icon for the target MAP.
Figure 489 Configuring the working channel
c.
Select the channel 153 to be used from the Channel list.
d.
Click Apply.
You can follow this step to configure the working channel for the MPP. The working channel of
the radio on the MPP must be the same as the working channel of the radio on the MAP.
8.
Enable radio:
a.
Select Radio > Radio from the navigation tree.
b.
Select the radio modes to be enabled for the MAP and MPP.
c.
Click Enable.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module