H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 184)

163
Table 63 Configuration items
Item Description
Port Display the port to be modified.
Untagged Member Display the VLAN(s) to which the port belongs as an untagged member.
Tagged Member Display the VLAN(s) to which the port belongs as a tagged member.
Member
Type
Untagged
Select the Untagged, Tagged, or Not a Member option:
• Untagged—Indicates that the port sends the traffic of the VLAN with the VLAN
tag removed.
• Tagged—Indicates that the port sends the traffic of the VLAN without removing
the VLAN tag.
• Not a Member—Removes the port from the VLAN.
IMPORTANT:
• You cannot configure an access port as an untagged member of a nonexistent
VLAN.
• When you configure an access port as a tagged member of a VLAN, or
configure a trunk port as an untagged member of multiple VLANs in bulk, the link
type of the port is automatically changed into hybrid.
• You can configure a hybrid port as a tagged or untagged member of a VLAN
only if the VLAN is an existing, static VLAN.
Tagged
Not a
Member
VLAN ID Specify the VLAN to which the port belongs.
VLAN configuration example
Network requirements
As shown in Figure 129 :
• GigabitEthernet 1/0/1 of the AC is connected to GigabitEthernet 1/0/1 of Switch.
• GigabitEthernet 1/0/1 on both devices are hybrid ports with VLAN 100 as the default VLAN.
Configure GigabitEthernet 1/0/1 to permit packets of VLAN 2, VLAN 6 through VLAN 50, and VLAN
100 to pass through.
Figure 129 Network diagram
Configuring the AC
1. Create VLAN 2, VLAN 6 through VLAN 50, and VLAN 100:
a. Select Network > VLAN from the navigation tree to enter the VLAN tab.
b. Click Add.
c. Enter VLAN IDs 2,6-50,100.
d. Click Apply.