H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 607
586
Table 186 Configuration items
Item Description
User-name
Specify a name for the local user.
Password
Confirm
Enter and confirm the password of the local user.
IMPORTANT:
Make sure the password does not include leading spaces, because they will be ignored.
Password Encryption Select a password encryption method: Reversible or Irreversible.
Group
Select a user group for the local user.
For information about user group configuration, see "
User-type
Specify the user type for the local user: Common User or Guest Admin.
A guest administrator manages guest accounts through the Authentication > User >
Guest page.
Level
Select an authorization level for the local user: Visitor, Monitor, Configure, or
Management, in ascending order of priority. A local user has the rights of the specified
level and all levels lower than the specified level (if any).
•
Visitor—A user of this level can perform ping and trace route operations but cannot
read any data from the device or configure the device.
•
Monitor—A user of this level can read data from the device but cannot configure the
device.
•
Configure—A user of this level can read data from the device and configure the
device, but it cannot upgrade the device software, configure users, or back up or
restore configuration files.
•
Management—A user of this level can perform all operations.
IMPORTANT:
This option is effective only for Web, FTP, Telnet, and SSH users of the Common User type.
Service-type
Select the service types for the local user to use: Web, FTP, Telnet, PPP, Portal,
LAN-access (accessing through the Ethernet, such as 802.1X users), SSH, or Terminal.
IMPORTANT:
•
If you do not specify any service type for a local user who uses local authentication,
the user cannot pass authentication and cannot log in.
•
Guest administrators can use the Web service.
•
Guests can use portal and LAN access services.
Expire-time
Specify an expiration time for the local user.
When authenticating a local user with the expiration time configured, the access
device checks whether the expiration time has elapsed. If not, the device permits the
user to log in.
VLAN
Specify the VLAN to be authorized to the local user after the user passes authentication.
IMPORTANT:
This option is effective only on portal and LAN users of the Common User type.
ACL
Specify the ACL to be used by the access device to restrict the access of the local user
after the user passes authentication.
IMPORTANT:
This option is effective only on PPP, portal, and LAN users of the Common User type.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module