H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 254)

233
Figure 201 Static domain name resolution configuration page
2. Click Add.
Figure 202 Creating a static domain name resolution entry
3. Configure the parameters, as described in Table 90 .
4. Click Apply.
Table 90 Configuration items
Item Description
Host Name
Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the most recently configured IP address takes effect..
Host IP Address
Configuring dynamic domain name resolution
1. From the navigation tree, select Network > DNS.
2. Click the Dynamic tab.
3. Select the Enable option for Dynamic DNS.
4. Click Apply.