H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 405)

384
Figure 374 Creating an AP
2. Create a wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Click Add.
c. On the page that appears, set the service name to mac-auth, select the wireless service type
Clear, and click Apply.
Figure 375 Creating a wireless service
3. Configure the wireless service:
After you have created a wireless service, you enter the wireless service configuration page.
a. In the Security Setup area, select Open-System from the Authentication Type list.
b. Select the Port Set box, and select mac-authentication from the Port Mode list.
c. Select the MAC Authentication box, and select system from the Domain list.
To create a domain, select Authentication > AAA from the navigation tree, click the Domain
Setup tab, and enter a domain name in the Domain Name field.
d. Click Apply.