H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 956
935
Figure 1002 Configuring the domain policy
2.
Configure a RADIUS scheme named system:
a.
Select User > RADIUS from the navigation tree.
b.
Click Add.
c.
Enter the scheme name system, select Extended as the supported server type, and select
Without domain name as the username format.
d.
Click the Add button in the RADIUS Server Configuration area.
e.
Select Primary Authentication Server as the server type, select IPv4 and enter IP address
10.153.10.131, enter port number 1812 and key expert, enter expert again to confirm the key,
and click Apply.
The RADIUS server is then added to the RADIUS server list.
Figure 1003 Configuring the primary authentication server
f.
Click Apply on the RADIUS page, as shown in
.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module