H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 440
419
7.
Configure a MAC authentication list:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click MAC Authentication List.
c.
Add a local user in the MAC Address field. 00-14-6c-8a-43-ff is used in this example.
d.
Click Add.
Figure 435 Adding a MAC authentication list
8.
Enable remote AP and download the configuration file to the AP:
a.
Select AP > AP Setup from the navigation tree.
b.
Click the
icon for the target AP in the list.
The page for configuring an AP appears.
c.
Expand Advanced Setup, set the configuration file to map.cfg, and select Enable from the
Remote AP list.
d.
Click Apply.
Figure 436 Enabling remote AP
9.
Bind an AP radio to a wireless service:
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module