Verifying the configuration, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 800
779
Figure 812 Setting session-mode load balancing
Verifying the configuration
Client 1 is associated with AP 1, and Client 2 through Client 6 are associated with AP 2. Because the
number of clients associated with AP 1 reaches 5 and the session gap between AP 2 and AP 1 reaches
4, Client 7 is associated with AP 1.
AP-based traffic-mode load balancing configuration example
Network requirements
•
As shown in
, all APs operate in 802.11g mode. Client 1 and Client 2 are associated with
AP 1, and no client is associated with AP 2.
•
Configure traffic-mode load balancing on the AC. The traffic threshold is 3 Mbps, which
corresponds to the threshold value of 10 in percentage, and the traffic gap is 12 Mbps, which
corresponds to the traffic gap value 40 in percentage.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module