H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 822)

801
Figure 846 Configuring band navigation
Verifying the configuration
Client 1 and Client 2 are associated with the 5 GHz radio of AP 1, and Client 4 can only be associated
with the 2.4 GHz radio of AP 1. Because the number of clients on the 5 GHz radio has reached the upper
limit 2, and the gap between the number of clients on the 5 GHz radio and 2.4 GHz radio has reached
the session gap 1, Client 3 will be associated with the 2.4 GHz radio of AP 1.
BAS AC configuration example
Network requirements
BAS AC 1 can support up to 1024 APs, and BAS AC 2 can support up to 192 APs. Enable MAC-BAC so
that the master AC assigns a BAS AC with the lowest workload (BAS AC 1) to the AP.
Figure 847 Network diagram
Switch
AP 1
Client
BAS AC 1
BAS AC 2
Master AC
NMS
192.168.0.111
192.168.0.112
192.168.0.113