H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 298)

277
Figure 252 Configuring ACL 2001 to permit users on network 10.110.10.0/24 to access the
Internet
To prohibit other users to access the Internet:
a. Select Deny for Action, as shown in Figure 253 .
b. Click Add.
Figure 253 Configuring ACL 2001 to prohibit other users to access the Internet
2. Configure a NAT address pool 0, including public addresses of 202.38.1.2 and 202.38.1.3.
a. Select Network > NAT from the navigation tree.
The Dynamic NAT page appears.
b. Click Add in Address Pool.
The Add NAT Address Pool page appears, as shown in
Figure 254 .
c. Enter 0 for Index, enter 202.38.1.2 for Start IP Address, and enter 202.38.1.3 for End IP
Address.
d. Click Apply.