Configuring the internal server – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 300
279
•
External hosts can access internal servers using public address 202.38.1.1/24.
•
Port 8080 is used for Web server 2.
Figure 256 Network diagram
Configuring the internal server
1.
Configure the FTP server:
a.
Select Network > NAT from the navigation tree.
b.
Click the Internal Server tab.
c.
Click Add in the Internal Server area.
The Add Internal Server page appears.
d.
Select Vlan-interface2 for Interface.
e.
Select the Assign IP Address option, and enter 202.38.1.1.
f.
Select the first option for Global Port and enter 21.
g.
Enter 10.110.10.3 for Internal IP.
h.
Select ftp for Service Type.
i.
Click Apply.
Figure 257 Configuring an internal FTP server
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module