Configuring a rule for an ipv4 basic acl, Table 209 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 669
648
Table 209 Configuration items
Item
Description
ACL Number
Set the number of the ACL.
•
WLAN-AP ACL—200 to 299.
•
IPv4 basic ACL—2000 to 2999.
•
IPv4 advanced ACL—3000 to 3999.
•
Ethernet frame header ACL—4000 to 4999.
For an IPv4 basic or advanced ACLs, its ACL number and name must be unique in
IPv4.
Match Order
Set the match order of the ACL:
•
Config—Packets are compared against ACL rules in the order that the rules are
configured.
•
Auto—Packets are compared against ACL rules in the depth-first match order.
Description
Set the description for the ACL.
Configuring a rule for an IPv4 basic ACL
1.
Select QoS > ACL IPv4 from the navigation tree.
2.
Click the Basic Setup tab.
Figure 685 Configuring an IPv4 basic ACL
3.
Configure an IPv4 basic ACL, as described in
4.
Click Add.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module