Configuration guidelines, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 529
508
Configuration guidelines
If you select manual channel adjustment, click Channel Optimize on the Operation tab every time you
perform manual channel adjustment.
Configuration procedure
1.
Before you configure manual channel adjustment, configure AP 1 on the AC to establish a
connection between them.
For the related configuration, see "
."
2.
Configure manual channel adjustment:
a.
Select Radio > Calibration from the navigation tree.
b.
Click the Parameters tab.
c.
Select Manual from the Dynamic Channel Select list.
d.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module