Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 612
591
•
By default, a newly added user profile is disabled.
•
A user profile takes effect and the authentication server notifies users of authentication results only
after the user profile is enabled. Therefore, if you do not enable the user profile, users using the user
profile will not be able to get online.
•
Only enabled user profiles can be referenced by users. Disabling a user profile logs out all users
using the user profile.
•
Enabled user profiles cannot be modified or removed. To modify or remove an enabled user profile,
you must disable it first.
Configuration procedure
1.
From the navigation tree, select Authentication > Users.
2.
Click the User Profile tab to display the existing user profiles
Figure 622 User profile list
3.
Click Add to enter the user profile name configuration page.
Figure 623 User profile name configuration item
4.
Enter a profile name profile.
5.
Click Apply.
The user profile configuration page appears.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module