Configuring traffic classification rules – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 688
667
Figure 696 Adding a class
3.
Configure the class information, as described in
.
4.
Click Add.
Table 220 Configuration items
Item
Description
Classifier Name
Specify a name for the classifier to be added.
Operation
Specify the logical relationship between rules of the classifier:
•
And—Specifies the relationship between the rules in a class as logic AND. The
device considers a packet belongs to a class only when the packet matches all the
rules in the class.
•
Or—Specifies the relationship between the rules in a class as logic OR. The device
considers a packet belongs to a class as long as the packet matches one of the
rules in the class.
Configuring traffic classification rules
1.
Select QoS > Classifier from the navigation tree.
2.
Click the Setup tab.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module