H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 650
629
c.
On the page that appears, enter 000f-e215-1515, 000f-e215-1530, and 000f-e213-1235 in
the MAC Address field, and then click Apply.
Figure 671 Adding MAC addresses to the rogue detection rule list
d.
Select Attacker, and click Add. Enter 000f-e220-405e in the MAC Address field and click
Apply.
Figure 672 Adding MAC addresses to the attacker list
5.
Enable countermeasures against the static rogue device:
a.
Select Security > Rogue Detection from the navigation tree.
b.
Click the AP Monitor tab, and click Common Set.
c.
Select Static Rogue Device. This is because the MAC address of Client 4 is added manually to
the attacker list.
d.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module