H3C Technologies H3C MSR 50 User Manual
H3c msr series routers
This manual is related to the following products:
Table of contents
Document Outline
- Title Page
- Preface
- Contents
- Configuring SNMP
- Configuring MIB style
- Configuring RMON
- Configuring NTP
- Overview
- NTP configuration task list
- Configuring NTP operation modes
- Configuring the local clock as a reference source
- Configuring optional parameters for NTP
- Configuring access-control rights
- Configuring NTP authentication
- Displaying and maintaining NTP
- NTP configuration examples
- NTP client/server mode configuration example
- NTP symmetric peers mode configuration example
- NTP broadcast mode configuration example
- NTP multicast mode configuration example
- Configuration example for NTP client/server mode with authentication
- Configuration example for NTP broadcast mode with authentication
- Configuration example for MPLS VPN time synchronization in client/server mode
- Configuration example for MPLS VPN time synchronization in symmetric peers mode
- Configuring cluster management
- Overview
- Cluster management configuration task list
- Configuring the management device
- Enabling NDP globally and for specific ports
- Configuring NDP parameters
- Enabling NTDP globally and for specific ports
- Configuring NTDP parameters
- Manually collecting topology information
- Enabling the cluster function
- Establishing a cluster
- Enabling management VLAN autonegotiation
- Configuring communication between the management device and the member devices within a cluster
- Configuring cluster management protocol packets
- Cluster member management
- Configuring the member devices
- Toggling between the CLIs of the management device and a member device
- Adding a candidate device to a cluster
- Configuring advanced cluster functions
- Displaying and maintaining cluster management
- Cluster management configuration example
- Configuring CWMP (TR-069)
- Overview
- CWMP configuration approaches
- Enabling CWMP
- Configuring ACS attributes
- Configuring CPE attributes
- Configuring the CPE username and password
- Configuring the CWMP connection interface
- Sending Inform messages
- Configuring the maximum number of attempts made to retry a connection
- Configuring the close-wait timer of the CPE
- Configuring the CPE working mode
- Specifying an SSL client policy for HTTPS connection to ACS
- Displaying and maintaining CWMP
- Configuring IP accounting
- Configuring NetStream
- Overview
- NetStream basic concepts
- NetStream key technologies
- NetStream sampling and filtering
- NetStream configuration task list
- Enabling NetStream on an interface
- Configuring NetStream filtering and sampling
- Configuring NetStream data export
- Configuring attributes of NetStream export data
- Configuring NetStream flow aging
- Displaying and maintaining NetStream
- NetStream configuration examples
- Configuring NQA
- Overview
- NQA configuration task list
- Configuring the NQA server
- Configuring the NQA client
- Enabling the NQA client
- Configuring an ICMP echo operation
- Configuring a DHCP operation
- Configuring a DNS operation
- Configuring an FTP operation
- Configuring an HTTP operation
- Configuring a UDP jitter operation
- Configuring an SNMP operation
- Configuring a TCP operation
- Configuring a UDP echo operation
- Configuring a voice operation
- Configuring a DLSw operation
- Configuring optional parameters for an NQA operation
- Configuring the collaboration function
- Configuring threshold monitoring
- Configuring the NQA statistics function
- Configuring NQA history records saving function
- Scheduling an NQA operation
- Displaying and maintaining NQA
- NQA configuration examples
- ICMP echo operation configuration example
- DHCP operation configuration example
- DNS operation configuration example
- FTP operation configuration example
- HTTP operation configuration example
- UDP jitter operation configuration example
- SNMP operation configuration example
- TCP operation configuration example
- UDP echo operation configuration example
- Voice operation configuration example
- DLSw operation configuration example
- NQA collaboration configuration example
- Configuring IP traffic ordering
- Configuring sFlow
- Configuring samplers
- Configuring PoE
- Hardware compatibility
- Overview
- PoE configuration task list
- Enabling PoE
- Detecting PDs
- Configuring the PoE power
- Configuring PoE power management
- Configuring the PoE monitoring function
- Configuring a PoE interface by using a PoE profile
- Upgrading PSE processing software in service
- Displaying and maintaining PoE
- PoE configuration example
- Troubleshooting PoE
- Configuring port mirroring
- Overview
- Configuring local port mirroring
- Configuring remote port mirroring
- Displaying and maintaining port mirroring
- Local port mirroring configuration example
- Configuring traffic mirroring
- Configuring the information center
- Overview
- FIPS compliance
- Information center configuration task list
- Outputting system information to the console
- Outputting system information to the monitor terminal
- Outputting system information to a log host
- Outputting system information to the trap buffer
- Outputting system information to the log buffer
- Outputting system information to the SNMP module
- Outputting system information to the Web interface
- Saving system information to a log file
- Managing security logs
- Enabling synchronous information output
- Disabling an interface from generating link up/down logging information
- Displaying and maintaining information center
- Information center configuration examples
- Using ping, tracert, and system debugging
- Configuring IPv6 NetStream
- Overview
- IPv6 NetStream basic concepts
- IPv6 NetStream key technologies
- IPv6 NetStream configuration task list
- Enabling IPv6 NetStream
- Configuring IPv6 NetStream data export
- Configuring attributes of IPv6 NetStream data export
- Configuring IPv6 NetStream flow aging
- Displaying and maintaining IPv6 NetStream
- IPv6 NetStream configuration examples
- Index