H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 701
680
Figure 707 Adding an IPv4 advanced ACL
3.
Define an ACL rule for traffic to the FTP server:
a.
Click the Advanced Setup tab.
b.
On the page as shown in
, select 3000 in the ACL list, select the Rule ID option, and
enter rule ID 2.
c.
Select Permit in the Action list.
d.
Select the Destination IP Address option, and enter IP address 10.1.1.1 and destination
wildcard 0.0.0.0.
e.
Select test-time in the Time Range list.
f.
Click Add.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module