Enabling igmp snooping globally – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 200
179
Step Remarks
2. Configuring IGMP snooping on a
Required.
Enable IGMP snooping in the VLAN and configure the IGMP
snooping version and querier feature.
By default, IGMP snooping is disabled in a VLAN.
IMPORTANT:
•
IGMP snooping must be enabled globally before it can be
enabled in a VLAN.
•
After enabling IGMP snooping in a VLAN, do not enable IGMP or
PIM on the corresponding VLAN interface, and vice versa.
•
When you enable IGMP snooping in a VLAN, this function takes
effect for ports in this VLAN only.
3. Configuring IGMP snooping on a
Optional.
Configure the maximum number of multicast groups allowed and the
fast leave function for ports in the specified VLAN.
IMPORTANT:
•
Multicast routing or IGMP snooping must be enabled globally
before IGMP snooping can be enabled on a port.
•
IGMP snooping configured on a port takes effect only after IGMP
snooping is enabled in the VLAN or IGMP is enabled on the
VLAN interface.
Optional.
Enabling IGMP snooping globally
1.
From the navigation tree, select Network > IGMP snooping.
The basic configuration page appears, as shown in
.
2.
Select Enable, and click Apply.
Figure 146 Basic IGMP snooping configurations
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module