H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 186
165
Figure 132 Modifying a VLAN
3.
Configure GigabitEthernet 1/0/1 as a tagged member of VLAN 2, and VLAN 6 through VLAN
50:
a.
Select Network > VLAN from the navigation tree and then select the Port tab.
b.
Click the
icon for GigabitEthernet 1/0/1.
The page for modifying the port appears.
c.
Select the Tagged option, and enter VLAN IDs 2, 6-50.
Figure 133 Modifying a port
d.
Click Apply.
A dialog box appears asking you to confirm the operation.
e.
Click OK.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module