Configuring advanced settings – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 339
318
Item Description
5GHz Radio
•
Enable—Enable the 5 GHz radio.
•
Disable—Disable the 5 GHz radio.
By default, the 5 GHz radio is disabled.
An AP examines the configuration before it uses the configuration of the AP group to
which it belongs. An AP might fail to implement the configuration due to configuration
conflicts such as a disconnected uplink with uplink detection enabled.
2.4GHz Radio
•
Enable—Enable the 2.4 GHz radio.
•
Disable—Disable the 2.4 GHz radio.
By default, the 2.4 GHz radio is disabled.
An AP examines the configuration before inheritance. An AP might fail to implement the
configuration because of configuration conflicts such as a disconnected uplink with
uplink detection enabled.
Configuring advanced settings
Figure 300 Configuring advanced settings
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module