Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 791
770
Figure 800 Configuring the address of the backup AC
Verifying the configuration
1.
When AC 1 operates correctly, view the AP status on AC 1 and AC 2. The AP connection priority
on AC 1 is set to 6 (the higher one), so AC 1 becomes the active AC. The AP establishes a
connection to AC 1 based on priority.
a.
On AC 1, select Advanced > AC Backup from the navigation tree.
b.
Click the Status tab.
The status information shows that AC 1 is the active AC.
Figure 801 Displaying the AP status on AC 1
c.
On AC 2, select Advanced > AC Backup from the navigation tree.
d.
Click the Status tab.
The information shows that AC 1 is acting as the standby AC.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module