H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 91)

70
Field Description
Transmitted Frames Statistics Statistics of transmitted frames.
Total Frames
Total number of frames (probe response frames and beacon frames)
transmitted.
Total Frames = Unicast Frames + Broadcast/Multicast Frames +
Others.
Unicast Frames
Number of unicast frames (excluding probe response frames)
transmitted.
Broadcast/Multicast Frames
Number of broadcast or multicast frames (excluding beacon frames)
transmitted.
Others Total number of other type of frames transmitted.
Discard Frames Number of frames discarded.
Retry Count Number of transmission retries.
Multiple Retry Count Number of frames that have been retransmitted.
Authentication Frames Number of authentication responses transmitted.
Failed RTS Number of RTSs failed during transmission.
Successful RTS Number of RTSs transmitted successfully.
Failed ACK
Number of transmitted frames for which no acknowledgement is
received.
Association Frames Number of association responses transmitted.
Packet Count Statistics Based on Size Packet statistics classified by packet size.
Packet Count Statistics Based on Rate Packet statistics classified by rate.
Packet Count Statistics Based on
802.11n Rate Packet statistics classified by 802.11n rate. The field is not displayed
if the device does not support 802.11n.
Received Frames Statistics Statistics of received frames.
Total Frames Number of frames received.
Unicast Frames Number of unicast frames received.
Broadcast/Multicast Frames Number of broadcast or multicast frames received.
Fragmented Frames Number of fragmented frames received.
FCS Failures Number of frames dropped due to FCS failure.
Authentication Frames Number of authentication requests received.
Duplicate Frames Number of duplicate frames received.
Decryption Errors Number of frames dropped due to decryption error.
Association Frames Number of association requests received.
Displaying tunnel latency information
1. Select Summary > AP from the navigation tree.
2. Click the Tunnel Latency tab.